MAN-01
待上传PendingSANPO J8108-R8 产品使用说明书SANPO J8108-R8 User Manual
产品参数、接口定义、控制模式和安全注意事项。Specifications, interfaces, control modes, and safety precautions.
SANPO 电机开发文档SANPO Motor Documentation
SANPO J8108-R8
集中下载产品说明书、开发例程和其他配套资源。Download product manuals, development examples, and supporting resources.
文档下载Document Downloads
产品说明书Product Manuals (2)
产品规格、安装接线与通信协议资料。Product specifications, installation, wiring, and protocol documents.
MAN-02
待上传Pending外形尺寸与安装说明Dimensions and Installation Guide
外形尺寸、安装孔位和机械安装要求。Dimensions, mounting holes, and mechanical installation requirements.
开发例程Development Examples (2)
用于快速验证连接、通信和基础控制的示例工程。Example projects for connection, communication, and basic control validation.
DEV-01
待上传PendingUSB 直连调试例程Direct USB Debugging Example
读取状态、配置参数并执行基础控制的示例。Example for status reading, parameter configuration, and basic control.
DEV-02
待上传PendingFDCAN 单/多轴控制例程FDCAN Single-/Multi-Axis Example
通过 SANPO SPINE 控制一台或多台 J8108-R8。Control one or more J8108-R8 motors through SANPO SPINE.
其他资源Other Resources (2)
固件维护、故障排查和其他配套资料。Firmware maintenance, troubleshooting, and supporting resources.
RES-01
待上传Pending固件升级说明Firmware Update Guide
升级前检查、更新、校验和恢复流程。Pre-update checks, installation, verification, and recovery.
RES-02
待上传Pending常见故障排查Troubleshooting Guide
常见故障状态、检查顺序和恢复建议。Common fault states, diagnostic sequence, and recovery guidance.